GallerySide Folding Security Doors Photo Gallery
Side foldingElite Series
If you have enough room for a wider pocket but don’t have a lot of depth available, you’ll want the New Elite’s 30%: 40% tighter stack for your project.
The New Elite also offers fewer vertical lines, and more visibility into the secured area. It’s lighter and easier to open and close, but tougher than ever.
It’s the perfect solution for retrofit situations where pocket depth is an issue, or if you can’t increase the pocket but want to extend the door.
Side foldingSlim Line Series
Adapting to any pocket requirement (including curves and L-angles), the Slim Line is a great solution for any secured area.
Most of the designs feature sleek vertical lines that allow maximum visibility for product display, even when the door is closed. The 5-inch stack allows you to use more space for your secured area than other doors.
Fits any application: new or retrofit, counter height to full height openings up to 14 feet tall.
EZ Series: With Pocket
The EZ 4 Inch security grille includes its own steel pocket frame and anodized aluminum pocket door, eliminating the need for your contractor to build one on site.
It arrives with the door already loaded in the pocket, saving installation time.
Even better, the pocket is 6-inches wide, allowing it to fit flush with commercial wall studs for a visually seamless integration.
FeaturesFeatures and Options
Dynamic Closures has a product for every security need. With feature-rich options included and custom options available, we can supply a system that suits each project’s unique demands. Features are unique to each product, so be sure to explore each one to find the best suited for your design.
FAQsFrequently Asked Questions
Dynamic Closures has made curtains hundreds of feet (almost a hundred meters) wide with our side-folding models. The only exception is the EZ series, there is a limit of about 32 feet for EZ Closure into one pocket. Dimensions will vary based on how many posts are needed for that specific layout.
The EZ models can be 12 feet in height. Dynamic has made a side-folding grille as high as 28 feet. Most competitors do not make grilles or closures over 10 feet or 12 feet high.
Dynamic Closures also has height adjustable side-folding doors.
No, there’s no need. Proper manual operation moves the curtain through some of the most creative layouts easily, saving the costs of motors and electrical hook up.
No! In fact the set clearance from the bottom of the curtain to the finished floor is 1-1/4 inches (32mm); to a counter top 3/4 in.(19mm). Sometimes floors are quite uneven and adding the optional adjustable height hardware is money well spent. The standard clearances may not be enough, or too much. It is because of these unexpected field problems that Dynamic’s optional adjustable height hardware can resolve a problem and avoid a crisis.
Very little. The 1-5/8 inch (41mm) height of the track is often partially or completely ‘buried’ by sheetrock or surface mounted on the exposed header.
Curtains are various weights depending on which model you choose. It is important that the entire header-support handle the stacked weight. A comprehensive reference chart can be found on each products landing page.
Not as big as you would think, Dynamic has the smallest stacking sizes in the industry. Amazingly, Dynamic’s EZ Closure and SlimLine stacks extremely small also. You can easily calculate the size of the stack using this calculator.
Dynamic’s EZ Closure includes a steel frame pocket and pocket door. All other side-folding models do not include a pocket. The general contractor builds the pocket and provides the door.
The terms accordion and scissor are often used, but side folding is the most accurate. The terms rolling, coiling and scissor apply to other products.
Our Elite models come standard with adjustable height hardware, making it easy to move the curtain up 1”, or down 1”, in ½” increments.
We can supply a variety of standard curves (90°, 120°, 135°, and 150°) to accommodate a variety of site conditions. Dynamic can also bend special curves in-house to ensure your door’s function at maximum efficiency.
Customer supportWe’re There For You Every Step Of The Way
We pride ourselves on industry-leading customer service. Our Customer Support team has decades of collective experience and will help you complete your design, and save time too.
If you’re trying to design a security enclosure to harmonize with a specific look, we can help you review the options and make a selection. Once you’ve made a decision, we can supply free BIM objects for your architectural plans, and even double check your Division 08 specifications to help prevent installation gotchas that destroy schedules, blow budgets, and not to mention cause stress.
Illini Architectural Products has been providing a full range of Dynamic Closures security products since 1985. We enthusiastically promote their products because they fabricate and ship material promptly and with an absolute minimum of product variation. Our customers can rely on long usage, repair parts when required, and products that look as good as they function. Dynamic is constantly upgrading their products, their sales department works closely with their distributors, and customer service is by far the best of any of the manufacturers we represent.
David L. Berns
Get StartedNeed help choosing a model for your project?
We're here to help, and go far beyond the usual standards. Talk to our team, send us your plans, or browse products on your own time.